CompactLogix Communication Modules
Home News

Understanding the GE IS215VCMIH2C VME Communications Board

Understanding the GE IS215VCMIH2C VME Communications Board

March 26,2025
Introduction to the IS215VCMIH2C Board
The GE IS215VCMIH2C is a VME Communications Board originally designed and manufactured by General Electric (GE) for use in the Mark VI Turbine Control System. This specialized printed circuit board (PCB) plays a crucial role in facilitating communication between various components within GE’s gas, steam, and wind turbine control systems.

As part of the Mark VI series, the IS215VCMIH2C ensures seamless data exchange between different modules, contributing to the efficient operation of automated turbine drive assemblies. Despite its importance, detailed technical manuals for this board are scarce online due to copyright restrictions imposed by the manufacturer.


Key Features and Functions
The IS215VCMIH2C serves as a VME Communication Card, enabling critical interactions between different system components. Its primary functions include:
Facilitating I/O Communication: The board allows Input/Output (I/O) cards to communicate with each other when mounted on the VME backplane.
Expansion Rack Support: It ensures smooth communication between I/O cards installed on expansion racks and the main system.
Backup Protection & Redundancy: The board interacts with I/O backup protection modules and triple redundant control modules for enhanced system reliability.
Processor Module Integration: It connects with the primary or main processor module, ensuring centralized control and data processing.


Importance in the Mark VI Turbine Control System
The Mark VI Turbine Control System relies on the IS215VCMIH2C for maintaining operational efficiency. Without this board, communication between critical system components would be disrupted, leading to potential turbine control failures.
Since the Mark VI series is used in gas, steam, and wind turbines, the IS215VCMIH2C plays a vital role in ensuring:
Real-time data exchange between control modules.
Redundancy and fault tolerance for uninterrupted operations.
System scalability through expansion rack compatibility.


Differences Between IS215VCMIH2C and Its Predecessors
It’s important to note that the IS215VCMIH2C is a revised version of the original IS215VCMIH2 board. The key difference lies in its “C-rated” functional revision, which may include:
Firmware updates for improved performance.
Hardware enhancements for better compatibility.
Bug fixes and optimizations for increased reliability.
Before purchasing, users should verify whether they need the original IS215VCMIH2 or the updated IS215VCMIH2C to ensure compatibility with their system.


Applications in Industrial Automation
The IS215VCMIH2C is not limited to turbine control systems alone. Its robust communication capabilities make it suitable for various industrial automation applications, including:
Power generation plants (gas, steam, and wind turbines).
Manufacturing automation systems requiring high-speed data transfer.
Process control environments where redundancy and reliability are critical.


Conclusion
The GE IS215VCMIH2C VME Communications Board is an essential component in the Mark VI Turbine Control System, ensuring seamless communication between I/O modules, expansion racks, and processor units. Its role in maintaining system efficiency and redundancy makes it indispensable for industrial automation and power generation applications.
If you’re considering purchasing this board, always verify whether you need the IS215VCMIH2C revision or its predecessor to ensure optimal compatibility with your system. For more insights on industrial automation components, stay tuned to our blog!

News & Blogs

  • Automation via SIEMENS 6DD1606-2AC0 Processor Module: A Key Component in Advanced Control Systems 22/04

    2025
    Automation via SIEMENS 6DD1606-2AC0 Processor Module: A Key Component in Advanced Control Systems
    Introduction In the ever-developing field of process automation, the role of processor modules in control systems is crucial. The 6DD1606-2AC0 processor module is part of SIEMENS' well-known SIMATIC system, which aims to provide performance control and operational efficiency in hostile automation environments. We will discuss the advantages, benefits and uses of the probe 6DD1606-2AC0 processor module, which can facilitate process control, non-communication and cooperation with other process systems, highlighting its importance in process automation.   Key Features of the SIEMENS 6DD1606-2AC0 Processor Module The Siemens 6DD1606-2AC0 processor module is a robust component used to manage high-speed processes and enable it to handle automated tasks of various processes. The 6DD1606-2AC0 is equipped with a high-performance central processing unit (CPU) that can execute multiple tasks simultaneously. It employs a system control that is highly suitable for performance requiring high efficiency and high availability. In addition, its architecture supports supported I/O modules to ensure compatibility with a wide variety of devices and systems. Such activity is important in the execution of which new technologies are continuously applied.   Through 6DD1606-2AC0 Optimization of Industrial Processes 6DD1606-2A CO processor modules play a key role in improving efficiency by improving the control accuracy and system response capability of complex calculations and processes such as manufacturing, energy, and oxidation processes. The module protection system starts to operate at optimal efficiency by processing large amounts of data from sensors and mounted equipment in a timely manner. This control algorithm helps to reduce energy sources, reduce power consumption, and improve the overall system performance. Advantageously, in such an environment, even the slightest deviation can cause a significant decrease in efficiency and a decrease in safety. This processor module also supports proactive security protection, allowing you to monitor the normal status of your control system and take measures before problems occur. The 6DD1606-2AC0 module ensures the start of the connection process, extends execution time and reduces communication.   Activity and Accumulation in Process Automation Systems One of the distinguishing features of the Siemens 6DD1606-2AC0 processor module is its high activity and convenience in process automation systems. As advanced technologies such as IoT, artificial intelligence and cloud computing continue to be adopted in this field, the need for control systems with the right flexibility and scalability is constantly increasing. The 6DD1606-2AC0 processor meets this demand by providing a platform that supports communication between various devices and devices. Fat networks and Profibus can be implemented to suit existing control infrastructure, reducing the need for expensive system modifications and allowing intended traf...
    All News
  • GE IC695CPU310 PLC: A Strong and Reliable Brain for Factory Machines 22/04

    2025
    GE IC695CPU310 PLC: A Strong and Reliable Brain for Factory Machines
    GE IC695CPU310 PLC: A Strong and Reliable Brain for Factory Machines In today's factories, everyone wants the machines to work well and not break down. The GE IC695CPU310 PLC is like a very strong and smart brain that helps factory machines do their jobs. It's made by a big company called GE (General Electric). Many factories use it because it's powerful, works all the time, and can do many different things. This article will explain what this smart brain does and how it helps factories make more things and work better.   What is the GE IC695CPU310 PLC? The GE IC695CPU310 PLC is a super smart part of GE's RX3i system. It's made for factories that need their machines to work perfectly and do exactly what they're told. PLC stands for Programmable Logic Controller. Think of it as the main computer that controls all the other machines in a factory. It takes information from sensors and then tells the machines what to do based on a set of instructions (a program). This makes the machines work automatically. The IC695CPU310 can think very fast and handle lots of information. It also can talk to many other machines and systems. This makes sure everything in the factory works together well.   Why is the GE IC695CPU310 PLC Good? Super Fast Thinking: It has a very strong computer inside that can do lots of calculations very quickly. This means the machines can keep working well even when they have many things to do. Lots of Memory: It has a lot of space to store the instructions (up to 32MB) and to remember information (up to 16MB). This is good for big factories that need to handle lots of complex tasks. Talks to Many Devices: It can speak many different "languages" that factory machines use, like Ethernet, Modbus TCP, and Modbus RTU. This means it can connect easily with machines from different companies. Doesn't Stop Working: You can set it up so there are two of them. If one stops working, the other one takes over right away. This makes the factory very reliable and stops making things from being interrupted. Easy to Add More Parts: You can connect more parts to it, like input/output modules, to control even more machines. This makes it easy to change and grow the system as the factory needs more.   Where Do Factories Use the GE IC695CPU310 PLC? Because it's so strong, the GE IC695CPU310 PLC is used in many different kinds of factories: Making Things: It helps control the machines that make products. It can tell them when to start, stop, and change what they're doing. This makes the factory make things faster and better. Managing Energy: In power plants and oil and gas factories, it helps control how energy is used. It watches the machines and helps them work in the best way to save energy. Controlling Traffic: It's used to control things like traffic lights in cities and trains on railways. Because it's fast and reliable, it helps these systems run smoothly even when they are very busy.   How Does the GE IC695CPU310 PLC Help Factor...
    All News
  • GE IC600LX624 PLC: A Smart Brain for Factory Machines 18/04

    2025
    GE IC600LX624 PLC: A Smart Brain for Factory Machines
    GE IC600LX624 PLC: A Smart Brain for Factory Machines Factories today want their machines to be smart and work by themselves. This helps them make things faster and better. The GE IC600LX624 PLC is like a smart brain for these machines. It's made by a big company called GE (General Electric). Many factories around the world use it because it's strong, easy to change, and works really well. This article will tell you what this smart brain can do and how it helps factories work better. What is the GE IC600LX624 PLC? The GE IC600LX624 PLC is a very important part of GE's smart machine systems. It's made for factories that need their machines to work all the time and do exactly what they are told. PLC stands for Programmable Logic Controller. Think of it as the "brain" of the machines in a factory. It watches what the machines are doing using sensors and then tells them what to do based on a set of instructions (a program). This makes the machines work automatically.    The IC600LX624 can do everything that older PLCs can do, but it's also faster at thinking and can handle more information. It lets factories set it up in many different ways, so it can be used for all sorts of automatic jobs. Why is the GE IC600LX624 PLC Good? Fast Brain: It has a very fast computer inside that can quickly understand what's happening and do complicated math. This means the machines can keep working well even when they have a lot to do. Easy to Grow: You can add more parts to it, like parts that connect to more machines or parts that help it talk to other systems. This means it can work for small lines of machines or big, complicated factories. You can change it as you need. Talks to Everyone: It can speak many "languages" that different factory machines and systems use, like Modbus, Profibus, and Ethernet. This means it can connect easily with everything else in the factory, whether it's controlling things nearby or far away. Strong and Works All the Time: It's built to be tough and not get messed up by things like shaking or electrical noise. It can work in hot, wet, and dusty places without problems. This saves money on fixing it and stops the machines from stopping. Easy to Tell What to Do: You can use different ways to tell it what to do (program it), like drawing diagrams or writing instructions. This makes it easy and fast to set up. Also, if there's a problem, you can check it and fix it using a computer, which saves time and money. Where Do Factories Use the GE IC600LX624 PLC? Because it works so well, factories use the GE IC600LX624 PLC for many different automatic jobs, especially in these areas: Making Things: It can control the lines of machines that make products. It can tell the machines when to start, stop, and change what they are doing. This makes the factory make more things faster and with better quality, and it reduces mistakes that people might make. Managing Energy: It can watch and change how machines that use energy work. This makes s...
    All News
  • GE URSHA Power Supply: Makes Factories Work Better 17/04

    2025
    GE URSHA Power Supply: Makes Factories Work Better
    GE URSHA Power Supply: Makes Factories Work Better In factories all over the world, it's super important for the machines to have power that is steady and works well. This helps everything run without problems. The URSHA Power Supply from GE is a new power box that does this job really well. More and more factories are using it because it's strong and you can trust it. This article will tell you why this power box is good and how it helps factories make more things and work without stopping. What is the URSHA Power Supply? The GE URSHA Power Supply is a special box that gives power to the machines in factories. It uses new ways to change power so that things like PLCs (the brains of the machines), DCSs (big control systems), and SCADA (systems that watch and control everything) always have the power they need. It doesn't matter if the factory is making lots of things or just a few, or if it's controlling how much energy is used – the URSHA Power Supply keeps the power on. Why is the URSHA Power Supply Good? Changes Power Well: This power box changes the power from the wall into the power the machines need without losing much energy. It works great whether the machines need a lot of power or just a little. Works with Different Machines: It can give steady power to many kinds of machines, even if they suddenly need more or less power. It's smart and changes how much power it gives to save energy. Keeps Everything Safe: It has special ways to stop bad things from happening, like too much power, getting too hot, or electricity going the wrong way. This keeps the machines safe so they don't break down. Gives Steady Power: It makes sure the power it sends to the machines is always the same. Even if the power from the wall isn't steady, the URSHA Power Supply keeps the machines working right. Where Do Factories Use It? Making Things Automatically: Modern factories have lines of machines that make things by themselves. These machines need power that never stops. The URSHA Power Supply is perfect for this because it keeps everything running smoothly. Controlling Big Systems: Factories use big computer systems to control robots, watch how much power is used, and manage things like heat and air. The URSHA Power Supply works with these systems to make sure everything is controlled correctly, even in tough factory environments. Managing Energy Use: Factories that want to use less energy need to watch how much they are using. The URSHA Power Supply gives steady power to the machines that do this watching, helping the factory save energy and money. How Does the URSHA Power Supply Help Factories? Machines Don't Stop: Because it gives power that is always steady, the machines that control the factory work better and break down less. This means the factory can keep making things without stopping. Saves Money on Fixes: This power box is strong and lasts a long time. It keeps working well, so the factory doesn't have to spend money fixing broken machines as often. S...
    All News
  • Powder Bed Fusion: A New Way to Make Things 22/04

    2025
    Powder Bed Fusion: A New Way to Make Things
    Powder Bed Fusion: A New Way to Make Things In the world of making things, there's a new technology called Powder Bed Fusion (PBF). More and more factories are using it to design and make things better. Are you thinking about using PBF in your factory? If yes, let's see why it's becoming popular and what good and bad things it brings.   What is Powder Bed Fusion (PBF)? PBF is a special way of making things. It can use many different materials. It uses a very strong heat source, like a laser, to melt tiny bits of powder together in certain areas. It makes parts layer by layer, and they are very accurate. This way, you can make complicated shapes that you can't make with old ways of manufacturing. This special way of making things can be used for many things, from very small parts to body-friendly structures, and even parts for airplanes and cars.   How Does PBF Work? PBF makes things one thin layer at a time. First, a very thin layer of powder is spread on a flat surface. Then, a strong heat source moves over the powder. It melts the powder in the places where the part will be. You can use many kinds of powder, like plastic, ceramic, and metal. After one layer is done, the flat surface moves down, and a new layer of powder is put on top. This keeps happening until the whole part is made. PBF uses materials better than old ways because you can often use the extra powder again. That's why airplane, medical, and defense companies are using PBF more and more.   Different Kinds of PBF PBF isn't just one thing. There are different types for different materials and what the final part will be used for: Selective Laser Sintering (SLS): SLS is a type of PBF that uses a laser to melt powder together. This lets you make complicated shapes for many uses. SLS is mostly used to make models and final parts. It uses plastic powders like nylon and polyester. It doesn't need a very strong laser, which makes it work well. SLS 3D printing is known for being not too expensive and fast. It can make complex shapes and there are more and more materials you can use. Because of this, it's great for making models quickly. It's also good for making parts to test before making the real thing and for making tools to test products. Another good thing about SLS is that it can print parts with thin walls and complicated insides. This makes it useful for airplanes, cars, and medical tools. Direct Metal Laser Sintering (DMLS): DMLS uses a laser that's not too strong. It mixes two or more metal powders that melt at different temperatures. The powder that melts at a high temperature is the main part, and the powder that melts at a low temperature holds it together. DMLS has many good things, like making parts that are very accurate and precise, and it doesn't take as long to make them. Also, because it doesn't use other materials to hold the metal together, you don't need to do as much work on the parts after they are printed. Electron Beam Melting (EBM): EBM uses a ve...
    All Blogs
  • From concept to control - Woodward will help you realize your automation requirements 22/04

    2025
    From concept to control - Woodward will help you realize your automation requirements
    Introduction In the field of industrial automation, which is currently developing rapidly, improving work efficiency and ensuring the continuous operation of equipment promotes increased production and profits. As a pioneer in automation technology, it is important to provide control systems and precise process solutions. Here, we will deeply consider how to utilize new automation technology to improve system performance and ensure the continuous running of processes. Integrated automation solutions A standard conceptual design is required for successful automation. It is important to understand the client's specific requirements and initiatives. We work closely with our guests to determine solutions and design systems to fully meet the customer's operational requirements. Whether in the energy, aviation, industrial manufacturing, or even transportation fields, it is difficult to say that a design suited to each task ensures a unique operating environment. You may need to conduct a detailed analysis of your operational system, identify low-efficiency cycles and bottle problems, and determine how to improve your system. Whether you are introducing new technology or coming up with an entirely new solution, better resource utilization, reduced production, and increased operational efficiency are the requirements from the beginning. The final goal. At this stage, after satisfying sufficient requirements, the design of and device components begins. To ensure the execution of the goal and minimize interruptions, it is important to implement a basic control system. Control units, high-precision executors, and even complex sensors ensure that each component operates reliably to provide hardware optimal results. High efficiency integration and precise control The configured automation system is very important, but it is important to ensure that it can run as efficiently as existing devices and platforms introduced. These control systems have a high degree of compatibility, allowing new technologies to be efficiently without the need to completely change the implementation, minimizing downtime and allowing companies to make better use of their investments in the latest technology. One of the key advantages of a control system is its outstanding sophistication. These systems aim to ensure the highest precision operation of the equipment as well as control the fuel usage of batteries, improve the manufacturing process of manufacturing equipment, and even improve navigation. The fuel efficiency of the air system controls the performance of the system from time to time and adjusts the control parameters based on the data to ensure the start of the process is optimal. In such fields, it is important to control it tightly, as even minor fluctuations can significantly reduce the performance of the system. The jammed control system ensures high-precision control through real-time data collection and advance calculation processing, stabilizing the system. Execute w...
    All Blogs
  • Three Ways Smart Supply Chains Help Factories 18/04

    2025
    Three Ways Smart Supply Chains Help Factories
    Three Ways Smart Supply Chains Help Factories Today's factories use smart ways to manage everything they need to make things. These smart ways are called "smart supply chains." They use smart computers (AI) and look at lots of information to help factories work better. This information includes what customers like, what people are saying online, and how the market is changing. By looking at all this information, the smart supply chain can find patterns and guess what will happen in the future. This helps factories make the right amount of things, spend less money, and make customers happier. Factories can quickly change how much they plan to make because they can see what's happening in the market right now. This helps them keep up with things like when suddenly lots of people want something or when they can't get enough of the materials they need. Experts think that by 2025, most people who run supply chains will use AI systems to help them guess what will be needed and make plans. This article will talk about three ways a smart supply chain helps factories: guessing what people will want (demand forecasting), finding the best ways to move things (route optimization), and managing what the factory has in stock (inventory management). Making these three things better makes the whole supply chain work much better. With new ideas like Supply Chain 4.0, businesses can create a system that can change quickly and easily when things change. 1. Smart Supply Chains Help Guess What People Will Want What is demand forecasting? Demand forecasting is like guessing how many of a product or service customers will want. Usually, businesses look at how much they sold in the past, use math formulas, and see what's happening in the market. Studies show that most people who lead supply chains still use computer programs like Excel to plan what they need. And most of these leaders know they need to use better technology soon. But the old way of guessing isn't very flexible and it's hard to change when people suddenly want more or less of something. This can lead to having too much stuff in stock or not enough. If a factory has too much stuff, it costs money to keep it in a warehouse. If they don't have enough, they might sell less and customers might be unhappy. This shows that the old ways aren't good enough anymore, and factories need better ways to guess what will happen in the future. The market changes a lot, and companies are making new products that don't last as long as they used to. This makes it even harder to guess what people will want. Plus, there's so much information about customers available now that it can be hard to handle. With a smart supply chain, smart computers and math formulas look at all this information, like what customers do and what's happening in the market, to make better guesses. Factories can change their plans quickly when things change because they can see what's happening right now. This helps them manage what they have in stock ...
    All Blogs
  • How Smart Supply Chains Cut Down on Surprise Stops in Factories 17/04

    2025
    How Smart Supply Chains Cut Down on Surprise Stops in Factories
    How Smart Supply Chains Cut Down on Surprise Stops in Factories More and more, factories are using "smart supply chains." This is like a new way of running things, called Supply Chain 4.0. It uses smart computers, information that updates all the time, and AI (artificial intelligence) to make factories stop working unexpectedly much less often and make more things faster.   Why Unexpected Stops Are Bad for Factories When machines in a factory stop working when they aren't supposed to, it causes big problems. It makes the factory make fewer things, costs more money, and can even make the business lose customers and look bad. This is especially true for factories that make things like medicine, airplanes, and cars because they use very complicated machines. One study said that factories lose about 25 hours of making things each month because of these surprise stops – that's like losing two weeks of work!   Stopping Unexpected Stops Costs a Lot Because things are costing more money around the world and factories are trying to make as much as they can, when machines stop, it costs even more. For example, in 2023, one study showed that when a car factory stops for one hour, it can lose over $2 million! In the oil and gas business, it's about $500,000 per hour. These numbers might even be lower than the real cost, which includes fixing the machines, getting new parts fast, and paying workers who can't work. Even though it costs so much, many factories still just fix machines when they break or fix them after a certain amount of time, instead of trying to guess when they will break. This old way doesn't stop surprise stops very well. That's why trying to guess when machines will need fixing is the way of the future. Guessing When Machines Need Fixing: Less Surprise Stops "Guessing when machines need fixing" means using computers to watch the machines all the time and look at information to see if they might break soon. Then, the factory can fix them before they actually stop working. The important parts of this are sensors on the machines and internet technology. These things collect information about how the machines are doing all the time. Then, the factory can see if there are any problems starting and fix them before the machine stops suddenly. By guessing when machines need fixing, factories can know when to order new parts, make their machines work better, and fix things like cleaning, oiling, and making sure everything is lined up right. This not only helps stop surprise stops but also makes the things they make better, uses less energy, and makes the whole factory work more efficiently. Putting Smart Supply Chains and Guessing Together Supply Chain 4.0 is like putting smart ways of making things together with smart ways of managing everything the factory needs. This makes making things and fixing machines even better. The important parts of a smart supply chain are sharing information all the time, being able to see what's happeni...
    All Blogs
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Our hours

Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)
Contact Us:+86 18030235313

Home

Products

whatsApp

Contact Us